15-06-2009
AMOC shall renewed in July 2009 by SGS the certificates of compliance.
AMOC shall renewed in July 2009 by SGS the certificates of compliance with the following standards:-
- Quality management system ISO 9001:2008.
- Environmental management system ISO 14001:2004.
- Occupational Health of safety OHSAS 18001:2007.
 

 
AMOC Products
AMOC aims mainly at satisfying the local needs of petroleum products, and launching the excess into the international market
AMOC Products  
 
Click here for provider products list
PARAFFIN WAX UNHYDROTREATED Fully Refined
Test Unit Method ASTM Specifications
AW 520 AW 540 AW 560 AW 580 AW 600 AW 620
Density @ 15 °C g/ml D -1298 Reported Reported Reported Reported Reported Reported
Kin.viscosity
@100°C 		mm2/s (cSt) D - 445 Reported Reported Reported Reported Reported Reported
Flash Point PMCC °C D - 93 Reported Reported Reported Reported Reported Reported
Congealing point °C D - 938 52 / 54 54 / 56 56 / 58 58 / 60 60 / 62 62 / 64
Penetration @ 25°C mm/10 D -1321 Max. 20 Max. 20 Max. 20 Max. 20 Max. 20 Max. 20
Oil Content % Wt D - 721 Max. 0.5 Max. 0.5 Max. 0.5 Max. 0.5 Max. 0.5 Max. 0.5
Solvent Content ppm D - 4626 Max. 400 Max. 400 Max. 400 Max. 400 Max. 400 Max. 400
 
PARAFFIN WAX HYDROTREATED FULLY REFINED
Test Unit Method ASTM Specifications
AW 520 AW 540 AW 560 AW 580 AW 600 AW 620
Density @ 15 °C g/ml D -1298 Reported Reported Reported Reported Reported Reported
Kin.viscosity
@100°C 		mm2/s (cSt) D - 445 Reported Reported Reported Reported Reported Reported
Flash Point PMCC °C D - 93 Reported Reported Reported Reported Reported Reported
Saybolt Colour   D - 156 min.+26 min.+26 min.+26 min.+26 min.+26 min.+26
Congealing point °C D - 938 52 / 54 54 / 56 56 / 58 58 / 60 60 / 62 62 / 64
Penetration @ 25°C mm/10 D -1321 Max. 20 Max. 20 Max. 20 Max. 20 Max. 20 Max. 20
Oil Content % Wt D - 721 Max. 0.5 Max. 0.5 Max. 0.5 Max. 0.5 Max. 0.5 Max. 0.5
Solvent Content ppm D - 4626 Max. 10 Max. 10 Max. 10 Max. 10 Max. 10 Max. 10
 
AUTOMATIC TRANSMISSION FLUID (ATFIII-G )
AMOC POWER PLUS ( Dexron III-G34291 )
Test Unit Method ASTM Specifications
Density @ 15 °C g/ml D -1298 Reported
Kin.viscosity @ 40 oC cSt D - 445 Reported
Kin.viscosity @ 100 °C cSt D - 445 6.8 - 8.4
Viscosity Index   D - 2270 MIN 160
Brookfield Viscosity @ -40 °C C.P. D - 2983 < 20000
Flash Point C. O. C. °C D - 92 MIN 170
Pour Point °C D - 97 < -45
Colour ASTM   D - 1500 6 - 8
Copper Strip Corrosion (3 hrs @ 150oC) rating D - 130 max 1b
 
Remarks
  1 - AMOC Power Plus is approved by ZF TE-ML 03D, 04D, 14A, 17C and Voith G-607. It also meets the requirements of General Motors G-34291, Allison C4 29521 04 and Ford Mercon M030701.
  2 - AMOC Power Plus IIIG passes all GM performenance tests (Oxidation, Cycling, Plate Clutch Friction, Band Clutch tests).
  3 - AMOC Power Plus IIIG is:
  a- Completely miscible with other approved ATF Dexron III products.
  b- Compatible with all types of Rubber and Seals.
  c- Suitable for American, Europeans and Japanese transmissions and power steering and in other applications where ATF Dexron III fluid is recommended.
 
AUTOMATIC TRANSMISSION FLUID ( ATF IID )
AMOC POWER (D-21611)
Test Unit Method ASTM Specifications
Density @ 15 °C g/ml D -1298 Reported
Kin.viscosity @ 40 oC cSt D - 445 Reported
Kin.viscosity @ 100 °C cSt D - 445 6.8 - 8.4
Viscosity Index   D - 2270 MIN 140
Flash Point C. O. C. °C D - 92 MIN 170
Pour Point °C D - 97 Max. - 40
Colour ASTM   D - 1500 6 - 8
Copper Strip Corrosion (3 hrs @ 150oC)   D - 130 1 b
Brookfield Viscosity @-40 °C c.P. D - 2983 Max. 40000
Crude Origin Egyptian
Refining Process Solvent refining, Solvent dewaxing & hydro-finishing
 
Approvals & Quality Levels
  AMOC Power is approved by ZF TE-ML 03D, 04D, 11A, 14A, 17C and Voith G-607. It also meets the requirements of General Motors, Allison C3, MAN 339-D and DC 236.7.
   
Miscibility & Compatibility
  AMOC Power is completely miscible and compatible with all other already marketed ATF Dexron IID types.
   
Application
  AMOC Power is suitable for all transmission American, European and Japanese power steering boxes and other applications where ATF Dexron IID is recommended.
  * Recommended Drain Interval: 30,000 KM under normal operating conditions.
 
TRANSFORMER OIL
Test Unit Method ASTM Specifications
Physical Properties
Density @ 15 °C g/ml D -1298 Reported
Kin.viscosity @ 40 oC cSt D - 445 Max. 12.0
Kin.viscosity @ 100 °C cSt D - 445 Reported
Viscosity Index   D - 2270 Reported
Pour Point °C D - 97 Reported
Health, Safety and Environment
Flash Point P.M.C.C. °C D - 93 Min. 140
Chemical Properties
Water Content ppm D - 1533 Max. 30
Corrosive Sulphur Rating D - 1275 (iso 5662) Non corrosive
Acid Number mgKOH/g D - 974 Max. 0.01
Electrical Properties
Electric Strength (after treatment) k. v IEC 156 OR 60156 Min. 70
Appearance   Visual Clear bright & Visually free from Solid Matter &Undissolved Water At Normal Ambient Temperature
Crude Origin Egyptian
Refining Process Solvent refining, Solvent dewaxing&
hydro-finishing
 
* UNINHIBITED ( IEC 60296- 2003 )
 
BASE OIL SN-150
Test Unit Method ASTM Specifications
Density @ 15 °C g/ml D1298 Reported
Kin. vis. @ 100 °C cSt D445 4.5 - 5.5
Kin. vis. @ 40 °C cSt D445 Reported
Viscosity Index   D2270 Min. 95
Flash Point C. O. C. °C D92 Min. 205
Pour Point °C D97 Max. -3
Color ASTM   D1500 Max. 1.0
Acid Number mgKOH/g D974 Max. 0.05
Conradson Carbon %mass D189 Max. 0.05
Ash Content %mass D482 Max. 0.05
Sulphur %mass D4294 Max. 0.02
Aromatics %   D3238 Max. 10
Water Content ppm D1744 Max. 100
Copper Corrosion (3h@100°C) rating D130 Max. 1
Appearance   Visual Clear bright & Visually free from Solid Matter &Undissolved Water At Normal Ambient Temperature
Crude Origin Egyptian
Refining Process Solvent refining, Solvent dewaxing&
hydro-finishing
 
BASE OIL SN-500(SN 400/500)
Test Unit Method ASTM Specifications
Density @ 15 °C g/ml D1298 Reported
Kin. vis. @ 100 °C cSt D445 9.3 - 10.0
Kin. vis. @ 40 °C cSt D445 Reported
Viscosity Index   D2270 Min. 95
Flash Point C. O. C. °C D92 Min. 205
Pour Point °C D97 Max. -3
Color ASTM   D1500 Max. 2.0
Acid Number mgKOH/g D974 Max. 0.05
Conradson Carbon %mass D189 Max. 0.05
Ash Content %mass D482 Max. 0.05
Sulphur %mass D4294 Max. 0.03
Aromatics %   D3238 Max. 10
Water Content ppm D1744 Max. 100
Copper Corrosion (3h@100°C) rating D130 Max. 1
Appearance   Visual Clear bright & Visually free from Solid Matter &Undissolved Water At Normal Ambient Temperature
Crude Origin Egyptian
Refining Process Solvent refining, Solvent dewaxing&
hydro-finishing
 
BASE OIL SN-600(SN 600/700)
Test Unit Method ASTM Specifications
Density @ 15 °C g/ml D1298 Reported
Kin. vis. @ 100 °C cSt D445 Reported
Kin. vis. @ 40 °C cSt D445 100 - 130
Viscosity Index   D2270 Min. 95
Flash Point C. O. C. °C D92 Min. 220
Pour Point °C D97 Max. -3
Color ASTM   D1500 Max. 2.0
Acid Number mgKOH/g D974 Max. 0.05
Conradson Carbon %mass D189 Max. 0.05
Ash Content %mass D482 Max. 0.05
Sulphur %mass D4294 Max. 0.03
Aromatics %   D3238 Max. 10
Water Content ppm D1744 Max. 100
Copper Corrosion (3h@100°C) rating D130 Max. 1
Appearance   Visual Clear bright & Visually free from Solid Matter &Undissolved Water At Normal Ambient Temperature
Crude Origin Egyptian
Refining Process Solvent refining, Solvent dewaxing&
hydro-finishing
 
FUEL OIL
Test Unit Method ASTM Specifications
A B C
Density @ 15 °C g/ml D - 1298 Max. 0.9800 Max. 0.9800 Max. 0.9800
Sulphur ,Total %mass D - 4294 1.01 - 1.10 1.11 - 1.20 1.21 - 1.30
Flash Point P.M.C.C. °C D - 93 Min. 60 Min. 60 Min. 60
Pour Point °C D - 97 Max. 39 Max. 39 Max. 39
Kin. Viscosity @100°C mm2/s(cSt) D - 445 Max. 32 Max. 32 Max. 32
Conradson Carbon %mass D - 189 Max. 12 Max. 12 Max. 12
Water Content %VOL D - 95 Max. 0.5 Max. 0.5 Max. 0.5
Carlorific Value   D - 4868      
Gross Calorific Value BTU/Ib   Min. 18500 Min. 18500 Min. 18500
Net Calorific Value BTU/Ib   Min. 17500 Min. 17500 Min. 17500
Sodium ppm IP 288 Max. 30 Max. 30 Max. 30
Nickel ppm IP 288 Max. 25 Max. 25 Max. 25
Vanadium ppm IP 288 Max. 50 Max. 50 Max. 50
 
© 2005 AMOC Inc. All rights reserved.